XDA Flame User Forum at xdaflameusers.com

Please be more specific which cabs, HTC apps have you added in this cab
Also have you looked here:
http://forum.xda-developers.com/showthread.php?t=429224

Have you included Player and HTC Album VGA skins found there?
So, all fixes players and HTC should be installed separate from this cab or (is patched for non HTC devices HTChome.dll included, YouTube app is not included as I can see from this cab and I doubt it will work on any of the avaliable WM 6.1 ROMs)?
Also there is a good icon pack for replacing the original taskbar icons with some Manila esque ones here:
http://forum.xda-developers.com/showthread.php?t=437307

Last edited by vlad48 (2008-11-06 13:14:14)

liomojo wrote:

Thanks man it is working on my ultimate 6150 too and it is very nice. the problems for me are , weather is not working but i guess it is because i dont have such aplication installed. i cant add programs and contacts to the contacts and program menus,  should i install any other things to make them work?
thank you again for your work.

You may have to go through the original topic on xda-developers as these seem to be common problems (look at post #2 in http://forum.xda-developers.com/showthread.php?t=398173 for a quick list - the topic is massive so if the fixes are not here good luck sorting through all the posts :-( ).

Last time I looked I did notice that the VGA files that were provided were still missing appropriate versions for Audio Manager even though someone in the post that Vlad mentioned actually posted some ones for the Opal.  These are the ones I have and they mostly work fine.  If this is still an issue I will dig up the post (or just post the files here if there is interest).

I have been using Manilla (VGA mode) for about 6 weeks.  I do not seem to have the weather or contact problems that many seem to complain about - my only (minor) gripes are:

* the Settings tab (you normally have to hit things twice to bring them up)
* the Communications button in Settings does not bring up the Communication Manager (which is so minor I have not even bothered to investigate)
* Audio Manager will not play in "unattended mode" properly (you need to add a registry setting to allow you to allow you to turn off the Flame but still let it play - this works fine however it will not go to the next song)

Note that I did actually have the last one working at one stage with V17 of Manilla 2D but I have not been able to fix it on V19 (which is what I am using) nor have I been able to make it work when I moved back to V17 (even after reloading onto a clean version of Cotulla's ROM ...).  Maybe I will have another go when V21 comes out soon ...

Manilla is a fantastic addition to the Flame - I highly recommend it.

where i can find the manilla2d skins for vga device (flame)?

it is unistalable , with no problems. you dont have to reset anything

ledut wrote:

very nice application, not fully fonctionnal yet, but I keep it for testing. Few screenchots below.

Not sure what you mean by "not fully functional" - I have been happily using virtually all the functions over the past 6 weeks (virtually as soon as the initial "non-HTC device" build was provided).  Seems to be pretty much all there to me.

I am not sure if you mean that it does not have the TF3D features - if so it will never have them as it was deliberately cut down due to people initially not being able to get TF3D running on non-TF3D devices.  If you are after the full TF3D experience xsoulreaver has reported that he can get it working but the hardware opengl drivers are crashing making it useless (frame rates on the software opengl implementations are too slow).  A bit of a pity really ...

If you have problems it may be because of the ROM you are on - I noticed that a couple of small things "broke" when I upgraded to EFNs latest ROM yesterday (e.g. the Settings screen no longer works at all for some reason after the upgrade).  I have not used things enough on the new ROM to see what else is not working.  I was previously using Cotulla's ROM ...

ledut wrote:

I'm glad to known This application can work better.
I'm going to test the Manila2D VGA application on the newer EFN's ROM versions and i will report here.

Don't bother - it won't work This cab can't install properly fully functional Manilla2d on any ROM build. If you really want to use M2D on your FLAME please follow the instructions posted here:
http://forum.xda-developers.com/showthread.php?t=429224

If you can not handle it please let me know I'll make all in one archive for all needed files and step by step install.

ledut wrote:

I don't want to waste my time with the v19 version (latest version for all devices) : it needs to install several fixes.
The author says that he will release the v21 soon. I will wait for this realese ant test the manila 2D application from your link. I will report here.

I am on V19 with no fixes - it works ok as mentioned above (in fact I just upgraded my rom to EFNs x version and my settings page come back).  In my experience the non-HTC version release normally takes a few days to come after the HTC release has been done.  As well, the V21 release has been "real close now" for a week ...

To install I normally, flash back to a clean ROM, install the 9 cabs that comes with V19 and then copy the V0.13 VGA icons directly into the Windows directory from my PC to my Flame (over USB when connected via ActiveSync).  There is a post in the thread that Vlad mentions where a guy has the VGA icons from the HTC Opal for Audio Manager which I also copy over.  This is all I do to get it working - the upgrade last night was done in around 30 minutes including upgrading the ROM!

Hi guys. Excuse me for asking that, But could some one make a zip file of all needed files for Manilla Plz? There is a huge bunch of pahes to read and i don't have the time right now.
I'd really appreciate.

Ok thanx FA, but what am i supposed to see after having installed all those cabs? 'caus it just doesnt change anything!

There is just nothing that appears after many softs reset man!
Will try something else (by the way, i've SPB mobileshell, should i uninstall it before?)

OK F.A. , now TouchFlo does launch (after 4 or 5 attempts), but it take only 1/4 of the screen! and i do not have same screen as in http://forum.xda-developers.com/showthread.php?t=429224 (post one)
What i've tried is your first link, so I installed "update_19balldevices.zip" from one to 9, then I installed the 6 other files.
I'm searching the settings to get it 640/480, but don't find it....
Keep lookin

Last edited by jeanfrederic (2008-12-03 19:56:58)