XDA Flame User Forum at xdaflameusers.com

Delete this files from \Windows\ folder. If you can't delete them, just rename it to something else.
SDBSN.DLL NVSDHC.dll sdmemory.dll
after reset it should work as usual.

Last edited by Cotulla (2008-12-09 17:24:55)

I think the problem the same as with WM50 Flame.
Probably I will look into after next rom release.

Last edited by Cotulla (2008-12-09 19:50:09)

004 WWE new version, still in developing now. have rather big changes.

Thanks, microsd card is detected again!

Thank you very much, Cotulla, for your hard work, but... I've installed your FLAME_SDHC_AND_WIFI_SUPPORT2_BY_COTULLA and tested it the whole day. 1. After iserting my SanDisk SDHC 6 Gb card my Flame showed 5059 Mb in use and 767.91 Mb free. 2. There is no possibility to copy/move any files from my pc to this card on Flame connected via USB. But when I insert this card to my card reader all operations are available. I tried to format my SDHC card with with Panasonic SD formatting utility but result was the same.
So I decided to roll back the installation. I'd like to try your new 003 ROM, but before need to backup my original ROM. Could anybody advise me software by means of which I can do copy of my original ROM? Thank you in advance.

Great thanks to your dedicated work and devoted Cotulla,
My Flame operated on wm5.0(Traditional Chinese)
After install support 2 cab , I  can use 8G SDHC card (display wrong but works well)and WiFi
But after 4 times suspend it go SB
So I try to install only one cab after clear boot
If only install "FLAME_SDHC_AND_WIFI_SUPPORT2_BY_COTULLA.cab" it can work without SB ,but card reader disappear (no SD or SDHC)
If only install "SdkCerts",it go SB frequently
We need to use Chinese system, I can't upgrade to wm6.1 ,so your driver "FLAME_SDHC_AND_WIFI" is very very important for us.
We expect you make great support 3 driver sincerely,thank you very much

Hi cotulla, i hope too that after  your next release you works on it!!
you're the best!
the dream is an 100% sdhc support witout SB!

hi cotulla!
have you always the intention to improve sdhc for WM5?

He means to export all registry entries. You can do it by Resco File Explorer with plugin or something else. There are some free apps for registry edit, use google to find them.

One other thing, lots more SB's too :-(, but I was already expecting that, however it seems to be worse than when I tried it out last year....

Also of note, when removing one card and putting another one in (2gb to 16gb) as often as not the new card is not recognized by the OS at all. Soft reset and it's fine though.

Last edited by sibble-comp (2009-08-13 18:28:50)

Hmm, so far so good...

Pro:
- successfully able to install the cab noted above from the sdcard
- swapping cards seems to work fine, but rescoe today screen doesn't update automatically, still shows 0.1gb free from the previous non-sdhc card, after soft reset, it does show 5.3gb free as it should
- all videos play fine from card, weird though, after the first software reset after install, both Pocket Player and CorePlayer couldn't play the mp4 videos, same error as above, after a second reset, both play all the videos just fine...
- so far seems to wake up fine without any SB's, we'll see as the day and weekend happens, if that keeps up

Con:
device seems MUCH slower to respond to stuff, like opening resco file explorer, scrolling through list of files etc, this seems to occur when wifi is active and I am using opera 8.65, although after a second reboot, that problem seems to be gone, I'll monitor it and report back.

All in all, I'd say this is working quite well so far.

Thanks for pointing that out to me.

Last edited by sibble-comp (2009-08-13 20:02:02)

cotulla!
ever there is win7 of O2 Flame ?